STEAM WANDS
Usually used for deep cleansing the most difficult to reach corners and hard to clean machine and equipment parts, REA steam wands are flexible and can be easily adapted to clean any type of surface.
100 KG STEAM WAND
This special wand is specifically designed for use with Giove control units, which are capable of managing large quantities of steam.
SHORT WAND WITH EXTRACTOR FUNCTION
A practical tool for cleaning small areas and parts: it can reach even the most difficult to access points, eliminating the resulting waste water.
- part n.: 218-VDA
- part n.: 218-VDA-50 50 cm long
VERSION FOR SATURNO MAXI:
- part n.: 218-VDA-3/4
- part n.: 218-VDA-50-3/4 50 cm long
SHORT WAND
A very handy tool for thorough cleaning of small surface areas and complex shapes; it can also be used in a hand-held mode for particularly deep cleaning.
- part n.: 207-VD
VERSION FOR SATURNO MAXI:
- part n.: 207-VD-3/4
LONG WAND
The wand can be used on uneven surfaces or on machines with complex shapes to remove residual dirt from small gaps and spaces that are not accessible using ordinary brushes. The tool must be used as close as possible to the surface to be cleaned in order to fully exploit the power of the steam jet.
- part n.: 202-VD 78 cm long
- part n.: 202-VD-110 110 cm long
VERSION FOR SATURNO MAXI:
- part n.: 202-VD-3/4 78 cm long
- part n.: 202-VD-110-3/4 110 cm long
WIDE JET WAND
Similar to the 202/VD long steam wands, these wands are designed to deliver the jet in a wider arc. The GA version produces a wider jet than the 202/VD, while the EP version (goose bill) creates a flat fan-shaped jet.
- part n.: 202-VD-EP 78 cm long
- part n.: 202-VD-GA 78 cm long
VERSION FOR SATURNO MAXI:
- part n.: 202-VD-EP-3/4 78 cm long
- part n.: 202-VD-GA-3/4 78 cm long
